 |
Standard Line
Mod. 250
• The body is built with stainless steel.
The film is located inside the machine for more protection.
• Wire cut-off resistance.
• Brake knob to tighten the film tension and lights plate which indicate the functions.
• Dimensions (height x width x length): 210 x 500 x 460mm. |
|
|
 |
Economic Line
Mod. 350
• The body is built with stainless steel and sides with coated sheet.
The film is located in the upper part of the machine.
• Wire cut-off resistance.
• Brake knob to tighten the film tension and lights plate which indicate the functions.
• Dimensions (height x width x length): 140 x 500 x 650mm. |
|
|
 |
PVC Dispenser
• Operation with equal characteristics as wrapping machines for PVC film but without the heat seal plate and the support tray.
• Perfect to pack hot meals in restaurants, delis, cafeterias, etc. |
|
Operation table (Mod. 251), optional.
|
|
 |
Supermarket Line
Mod. 550
• The body is built with stainless steel.
The film is located inside the machine for more protection.
• Cut-off system done through a round resistance of 8mm of diameter. Such resistance does not replace regularly and avoids the detachment of smoke during the cut-off.
• The brake system allows the use of the film in its maximum tension and saves approximately 5% of the product.
• Wrapping machine hot plate covered with non stick paint.
• Dimensions (height x width x length): 210 x 540 x 400mm.
|
|
 |
550 - Cut-off system
|
 |
| 550 - Brake System |
|
|
